Computerized Analysis of Superheated Rankine Cycle

Authors

  • Mohd Yusoff Senawi School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor
  • Mohd Fairus Mohd Hashim School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor

Keywords:

Rankine cycle, thermal efficiency, specific steam consumption

Abstract

Thermodynamic property equations obtained from the literature have been used to simulate
the performance of a superheated Rankine cycle, with water as the working fluid. The
equations were embedded in a computer program, where the inputs are condenser
pressure, boiler pressure, turbine inlet temperature, and isentropic efficiency of the turbine.
The program outputs are the heat supply at the boiler, network output, thermal efficiency
and specific steam consumption. A case study demonstrates the effects of the condenser
pressure, boiler pressure, and turbine inlet temperature on the cycle performance. The
program outputs replicate the well-known facts, where thermal efficiency increases with a
decrease in condenser pressure and it increases with an increase in the turbine inlet
temperature.

References

Patek J. and Klomfar J., 2009. A Simple Formulation for Thermodynamic Properties of Steam from 273 to 523 K, Explicit in Temperature and Pressure, International Journal of Refrigeration, 32: 1123–1125.

Saul A. and Wagner W., 1987. International Equations for the Saturation Properties of Ordinary Water Substance, J. Phys. Chem. Ref. Data, 16(4): 893–901.

Levelt Sengers J.M.H., 1983. Thermodynamic Properties of Steam in the Critical Region, J. Phys. Chem. Ref. Data, 12(1): 1–28.

Hill P.G., 1990. A Unified Fundamental Equation for the Thermodynamic Properties of H2O, J. Phys. Chem. Ref. Data, 19(5): 1233–1274.

Popiel C.O. and Wojtkowiak J., 1998. Simple Formulas for Thermophysical Properties of Liquid Water for Heat Transfer Calculations (from 0oC to 150oC), Heat Transfer Engineering, 19(3): 87–101.

Cengel Y.A and Boles M.A., 2011. Thermodynamics an Engineering Approach, The McGraw-Hill Companies, New York, USA.

Moran M.J. and Shapiro H.N., 2004. Fundamentals of Engineering Thermodynamics, John Wiley and Sons, Inc., New Jersey, USA.

Sonntag R.E., Borgnakke C. and Van Wylen G.J., 2003. Fundamentals of

Thermodynamics, John Wiley and Sons, Inc., New York, USA.

Irvine T.F. and Liley P.E., 1984. Steam and Gas Tables with Computer Equations, Academic Press, Inc., Orlando, USA.

Affandi M., Mamat N., Mohd Kanafiah S.N.A. and Khalid N.S., 2013. Simplified Equations for Saturated Steam Properties for Simulation Purpose, Procedia Engineering, 53: 722–726.

Wagner W. and Pruss A., 1993. International Equations for the Saturation Properties of Ordinary Water Substance – Revised According to the International Temperature Scale of 1990, J. Phys. Chem. Ref. Data, 22(3): 783–787.

Downloads

Published

2019-05-15

How to Cite

Senawi, M. Y., & Mohd Hashim, M. F. (2019). Computerized Analysis of Superheated Rankine Cycle. Jurnal Mekanikal, 41(2-S). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/340

Similar Articles

1 2 3 4 5 6 7 8 9 > >> 

You may also start an advanced similarity search for this article.