DEVELOPMENT AND IMPLEMENTATION OF RADIOFREQUENCY IDENTIFICATION (RFID) TECHNOLOGY FOR INVENTORY MANAGEMENT SYSTEM: A CASE STUDY

Authors

  • Wan Harun Wan Hamid Faculty of Mechanical Engineering Department of Manufacturing and Industrial Engineering, University Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
  • Loh Chee Hong Faculty of Mechanical Engineering Department of Manufacturing and Industrial Engineering, University Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.

Keywords:

AIDC, RFID, Inventory management, Supply store, Borrow-usedreturn

Abstract

This paper describes a study to develop and implement Radio-Frequency Identification (RFID) technology for inventory management system in a supply store unit. Firstly, data was collected to identify the existing inventory management problems in the supply store management, and then followed by defining requirements of the system which suggested the use of RFID technology to fulfill these requirements. The development process included the utilization of specific hard-ware and self developed software programmed for usage in the supply store management. The system was tested in order to evaluate its efficiency, effectiveness, reliability, security and cost justification. It was found that the newly developed system had successfully managed to capture inventory data, track the borrower ID, keep the record updated and able to display the history of borrowed items, and also the fine imposed due to late return. The system also generated reports for inventory management and audit works in the supply store.

References

Trebilcock, Bob, 2000. Information, Information, Everywhere, Supply Chain Yearbook.

Holt. Stannie,1998. Packaged Application and Internet Technology Can Improve the Line, Supply Chain Management And Technology Information, Enterprise Computing. November 1998.

Automation Identification Manufacturers, 2001, www.aimglobal.org, 2001

Myerson M. Judith, 2007, RFID in the Supply Chain, A Guide to Selection and Implementation, Auerbach Publications Taylor & Francis Group.

Finkenzeller, Klaus, 1999, RFID Handbook (RFID Fundamentals and Application, John Wiley & Son Ltd..

Huang, Y. F., George Q. Zhang and Jiang, P. Y. 2007, RFID-based Wireless Manufacturing for Walking-worker Assembly Islands with Fixed-position Layouts, Robotics and Computer-Integrated Manufacturing, 23, 2007, pp 469-477.

Gary M. Gaukler, 2005, RFID in Supply Chain Management, Stanford University.

Downloads

Published

2018-04-05

How to Cite

Wan Hamid, W. H., & Chee Hong, L. (2018). DEVELOPMENT AND IMPLEMENTATION OF RADIOFREQUENCY IDENTIFICATION (RFID) TECHNOLOGY FOR INVENTORY MANAGEMENT SYSTEM: A CASE STUDY. Jurnal Mekanikal, 27(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/130

Issue

Section

Mechanical

Similar Articles

<< < 1 2 3 4 > >> 

You may also start an advanced similarity search for this article.