PENJADUALAN PREEMPTION MENGGUNAKAN ATURAN PELEPASAN BERPRIORITI DALAM SISTEM BERGANGGUAN

Authors

  • Ayu Bidiawati J.R Ayu Bidiawati J.R Jabatan Pengeluaran dan Industri Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia 81310 Johor Bahru, Johor, Malaysia
  • Sha'ri Mohd.Yusof Jabatan Pengeluaran dan Industri Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia 81310 Johor Bahru, Johor, Malaysia
  • Mohamed Shariff Nabi Baksh Jabatan Pengeluaran dan Industri Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia 81310 Johor Bahru, Johor, Malaysia

Keywords:

Penjadualan pengeluaran, Aturan Pelepasan, Sistem Bergangguan

Abstract

Kertas kerja ini membentangkan kajian yang bertujuan untuk mengemukakan panduan untuk
membantu sesebuah syarikat dalam membuat keputusan terhadap penjadualan yang
bergangguan. Penjadualan semula dicadangkan dengan melakukan 'preemption ', Kajian
dilakukan dengan pendekatan secara heuristik, iaitu dengan membandingkan beberapa kaedah
aturan pelepasan berprioriti. Aturan pelepasan tennasuk Masuk Dahulu Keluar Dahulu (First
Come First Serve ), Tarikh Siap Terawal (Earliest Due Date), Masa Proses Terpendek (Shortest
Processing Time) dan Masa Proses Terlewat (Latest Processing Time) telah digunakan dalam
kajian ini. Hasil kajian ini mendapati bahawa aturan pelepasan Tarikh Siap Terawal lebin
berkesan berbanding dengan aturan lain. Perbandingan dilakukan terhadap beberapa kriteria
penilaian , seperti purata kelewatan (mean lateness), purata masa alir (mean flowtime), 'mean
tardy ', dan 'throughput '.*

References

Gasperz, V., 1998. "Production Planning and Inventory Control:

Berdasarkan Pendekatan Sistem Terintegrasi MRP II dan lIT Menuju Manufacturing 21" Jakarta: Gramedia Pustaka Utama.

Porter, K., Little, D., Peck, M. dan Rollins, R., 1999. "Manufacturing Classifications: Relationships with Production Control Systems". Integrated Manufacturing Systems. 10:1; 189-198. MCB Press.

Sipper, D., dan Bulfin, R.L., 1997, "Production: Planning, Control and Integration" New York: McGraw-Hill Companies.

Choi, S. H. dan Lung, J. S., 2000, "A Sequence Algorithm for Minimising Makespan in Multi-part and Multi-machine Flowshop Cases." Integrated Manufacturing Systems. 11:1; 62-73.

Luh, P.B., Wang, J.H., dan Tomastik, R.N., 1997,. "Near-Optimal Scheduling of Manufacturing System with Presence of Batch Machines and Set-up Requirements' . Annals ofthe CIRP. Vol. 46.

Paz, N.M. dan Leigh, W., 1999,. "Maintenance Scheduling: Issues, Results and Research Needs. International Journal Operations and Production Management". Vo1.14, No.8, MCB Press.

Djellab, K, 1999. "Scheduling Preemptive Jobs with Precedence Constraints on Parallel Machines." European Journal of Operation Research. 355-367

Lam, K. dan Xing, W., 1997, "New Trends in Parallel Machine Scheduling." International Journal of Operations and Production Management, 17:3; 326338.

Newman, W. R. dan Maffei, M. J., 1999,. "Managing the Job Shop: Simulating the Effects of Flexibility, Order Release Mechanisms and Sequencing Rules, " Integrated Manufacturing System, 10:5; 266-275.

Conway, R.W., Maxwell, W.L., dan Miller, L.W., 1967, "Theory of Scheduling", London: Reading MA Addison Wesley.

Nahmias, S., 1997, "Production and Operations Analysis. " Chicago: Irwin.

Vollman, T. E., Berry, W. L. dan Whybark, D. c., 1997, "Manufacturing Planning and Control Systems" 4th. ed. McGraw-Hill.

WITNESS User Manual, 1996. UK: AT & ISTEL.

Emshoff, J.R. dan Sisson, R.L., 1970. "Design and Use of Computer

Simulation Models". New York. MacMillan Publishing Co.

Pegden, C.D., 1990, " Introduction to Simulation Using SIMAN" New York: McGraw-Hill.

Daniel, V. dan Guide Jr. R., 1997, "Scheduling with Priority Dispatching Rules and Drum-Buffer-Rope in a Recoverable Manufacturing System," International Journal Production Economics, 101-116.

Selladurai, V., Aravindan, A, Ponnambalam, S. G. dan Gunasekaran, A 1995, "Dynamic Simulation of Job Shop Scheduling for Optimal Performance" International Journal of Operations and Production Management. 15:7; 106-120.

Duwayri dan Mollaghasemi, M., 2001,. "Scheduling Setup Changes at Bottleneck Facilities in Semiconductor Manufacturing, "Proceedings of the 2001 Winter Simulation Conference.

Xing, Wenxun dan Zhang, Jiawei., 2000,. "Parallel Machine Scheduling With Splitting Jobs". Discrete Applied Mathematics, Vol. 103,259-269.

Downloads

Published

2018-04-26

How to Cite

Ayu Bidiawati J.R, A. B. J., Mohd.Yusof, S., & Nabi Baksh, M. S. (2018). PENJADUALAN PREEMPTION MENGGUNAKAN ATURAN PELEPASAN BERPRIORITI DALAM SISTEM BERGANGGUAN. Jurnal Mekanikal, 17(1). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/215

Issue

Issue 17: June 2004

Section

Mechanical

License

Copyright of articles that appear in Jurnal Mekanikal belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.