SENSITIVITY ANALYSIS OF COLUMNS AT EXTREME TEMPERATURE

Authors

  • Mohamed EI-Shayeb Faculty of Mechanic al Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor
  • Badri Abd Ghani Faculty of Mechanic al Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor
  • T.T.Lie T.T.Lie Division of Building Research National Research Centre, Canada

Keywords:

Keywords

Abstract

This paper carried out a sensitivity analysis in order to know the
effect of each parameters towards the mechanical strength of the
protected column so that the results of this sensitivity analysis can
be used to assist in the furth er research to increase the fire
resistance. Among the parameters investigated are temperat ure.
insulation thickness. load carrying capacity.

References

I . Ghani, B. A. , Developm ent of Mathematical Models Using Numerical Method with Experimental Validation to Predict the Life Span of Engineering Component During Fire, M.Sc. Thesis, University Technology of Malaysia, 1997.

Ghani , B. A. et. ai, Heat Tran sfer and Strength Analysis of Column at Extreme Temperature, Jumal Mekanikal, Faculty of Mechanical, University Technology of Malaysia, Vol. 2, 1996.3. Ghani, B. A. .Experimental Verification of Column at Extreme Temperature, Jurnal Mekanikal, Faculty of Mech ani cal, University Technology of Malaysia, Vol. 2, 1996.

El-S haycb, Mohamed , Fire-R esistance of Conc rete-F illed and Reinforced Concrete Columns, PhD. Thesis, University of New Hampshire, USA, May 1986.

Lie. T. T., Temperature of Protected Steel in Fire, Paper 8 o f Behaviour of Structural Steel in Fire, Ministry of Technology and Fire Offices, Committee Joint Fire Research Organisat ion Symposium No.2, H. M. S. 0. , Londo n, 1968.

Lie, T. T., Feasibility of Determining the Equi librium Moisture Condition in Fire Resistance Test Specimens by Measuring Their Electrical-Resistance, Building Research Note No. 75, Division of Building Research , NRC, Ottawa, 1971.

Dusinberre, G. M., Heat Transfer Calculations by Fini te Differences, International Textbook Company, Scranton, Pennsylvania, 1961.

Harrnathy, T. Z. and Lie, T. T. , Experimental Verification of the Rule of Moisture Moment , Fire Technology, Vo l. 7, 1964 p. 17.

Barde ll, K., Spray-Applied Fire Resistive Coatings for Steel Building Columns, Fire Resist ive Coatings: The Need For Standards, ASTM STP 826, Lieff, M. and Stum pf, F. M. , cds., American Society for Testing and Material s, 1983,40-5 5.

Standard Methods of Fire Tests of Building Construction and Materials, ASTM Designation E119-69, 1969 Book of ASTM Standards, Part 14, pp . 436-

Brit. Iron Steel Res. Assoc., Physical Constants of Some Commercial Steels at Elevated temperature, Butterworths Sci. Publ., London, 1953.

Fujii , S., The Theoretical Calculation of Temperature-Rise of Thermally Protected Steel Column Exposed to the Fire, Building Research Institute Occasional Report No. 10, Tokyo, 1963.

Emmons, H. W., The Numerical Solution of Heat Conduction Problems, Transactions of the American Society of Mechanical Engineers, Vol. 65 , 1943, pp . 607-61 5.

Thrinks , W. and Mawhinney, M. W., Industrial furnaces, John Wiley and Sons, lnc., New York, 19

Law, M., Structural Fire Protection in the Process Industry, Building, Vol. 2 16, No. 29 , 1969, pp . 86-90.

Rains, W.A ., Eva luation on Existing Fire Protection Materials, Phase I Report, Presented to the American Iron and Steel Institute Fire Technology Subcommittee, 1973.

Stumpf, F. M., Spray-Applied Fibrous Materials and Fire Resistive Coatings, Presented to the ASTM, 1984.

Downloads

Published

2018-05-21

How to Cite

EI-Shayeb, M., Abd Ghani, B., & T.T.Lie, T. (2018). SENSITIVITY ANALYSIS OF COLUMNS AT EXTREME TEMPERATURE. Jurnal Mekanikal, 3(1). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/302

Issue

Section

Mechanical