Stress Corrosion Cracking of Steel Component Exposed in Simulated Seawater

Authors

  • M. Amaluddin M. Sabri School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor
  • Esah Hamzah School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor
  • Lau Jia Ming School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor

Keywords:

Stress corrosion cracking, corrosion in simulated seawater

Abstract

Stress corrosion cracking (SCC) is the fracture of susceptible material under sufficient tensile stress and exposed to the corrosive environment. A reliable experimental setup for SCC is required to determine the material performance in artificial environment before being deployed in actual situation. Creep machine was modified to establish a constant load SCC test setup for round and plate specimens. The furnace was removed and replaced by the designed machine parts including test solution chamber, grips, leakage prevention mechanism and other related components. The reliability of the established SCC test setup was evaluated by comparing the elongation and hardness of specimen after SCC in corrosive environment and tensile test under constant load at ambient temperature without any corrosive liquid. Both experiments were conducted with a fixed time period before the elongation and hardness of each specimen were recorded. The load of 60 kg and 30 kg for round and plate specimens, respectively were applied in the corrosive environment of 3.5% NaCl simulated seawater for the SCC test. It was found that SCC caused the specimen to have more elongation and lower the hardness compared to the specimen tested in air without any liquid. This is due to the presence of the corrosive environment containing the chloride ions that caused corrosion on the specimen under stress. Consequently, the specimens that have undergone the SCC test suffered more deformation compared to those tested in air. It can also be concluded that the experimental setup for the SCC test was successfully designed, fabricated and validated.

References

Yong L.Z., Liang Z.T., Ke L.R., Huan J.J., Wei D.C. and Gang L.X., 2016. Influence of Factors on Stress Corrosion Cracking of P110 Tubing Steel Under CO2 Injection Well Annulus Environment, Journal of Central South University, 23(4): 757–764. 2. Heaver E.E., 1994. Stress Corrosion Cracking of Steels in Industrial Process Environment, PhD Thesis, University of Pretoria, Republic of South Africa. 3. Uhlig H.H. and Revie R.W.,1986. Corrosion and Corrosion Control, Riley New York.

Espinosa-Medina M.A., Sosa E., A´ngeles-Cha´vez C. and Contreras A., 2011. Assessment of pH and Temperature Effects on Stress Corrosion Cracking of 1018 Low Carbon, Corrosion Engineering, Science and Technology, 46(1): 32-41. 5. Hameed K., Jaafer H.I. and Ali A-K.M., 2016. Study the Stress Corrosion Cracking Susceptibility of Low Carbon Steel in 0.1M of Sulfuric Acid Solution Using U-Bend Test, International Journal of Scientific & Engineering Research, 7(8): 1790-1801. 6. Prawoto Y., Sumeru K. and Wan Nik W.B., 2012. Stress Corrosion Cracking of Steels and Aluminium in Sodium Hydroxide:Field Failure and Laboratory Test, Advances in Materials Science and Engineering, 2012: Article ID 235028. 7. Humpries M.J. and Parkins R.N., 1967. Stress Corrosion Cracking of Mild Steels in Sodium Hydroxide Solutions Containing Various Additional Substances, Corrosion Science, 7(11): 747-761. 8. Bulloch J.H., 1991. Stress Corrosion Cracking of Low Alloy Steel in Natural Seawater Environment-The Influence of Carbon Level, Theoretical and Applied Fracture Mechanics, 16(1): 1-17.

Downloads

Published

2019-05-09

How to Cite

M. Sabri, M. A., Hamzah, E., & Jia Ming, L. (2019). Stress Corrosion Cracking of Steel Component Exposed in Simulated Seawater. Jurnal Mekanikal, 41(1). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/326

Issue

Section

Mechanical

Similar Articles

<< < 1 2 3 4 5 > >> 

You may also start an advanced similarity search for this article.