Reliability, Availability and Maintanability Study of A Power Generation Plant

Authors

  • Suganesh Selvaraju School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor
  • Mohd Foad Abdul Hamid School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor

Keywords:

Power plant, RAM study, Monte-Carlo simulation, availability, maintenance planning

Abstract

Power generation plants need to produce electricity on a continuous rate to cater for the
electricity demand of the public. The performance of the power generation plant could be
evaluated in terms of its availability. By performing reliability, availability and
maintainability (RAM) study, the performance of the power generation plant could be
investigated. By using the failure and repair data of the power plant, Monte-Carlo
simulation was conducted to predict the performance of the power plant system for the next
25 years. From the simulation, the system uptime and downtime duration, system
availability, failed components list, spare parts list, and labor costing were obtained.
Maintenance planning can be planned by using the results obtained from the simulation.
The system was observed to have an average availability of 93% for the next 25 years based
on the simulation.

References

Tsarouhas P., 2012. Reliability, Availability and Maintainability Analysis in Food Production Lines: A Review, International Journal of Food Science & Technology, 47(11): 2243-2251.

Corvaro F., Giacchetta G., Marchetti B. and Recanati M., 2017. Reliability, Availability, Maintainability (RAM) Study, on Reciprocating Compressors API 618, Petroleum, 3(2): 266-272.

Barberá L., Crespo A., Viveros P. and Kristjanpoller F., 2012. RAM Analysis of Mining Process: A Case Study of A Copper Smelting Process in The Field of Mining, Chile, IFAC Proceedings, 45(31): 217-222.

Adhikary D., Bose G., Chattopadhyay S., Bose D. and Mitra S., 2011. RAM Investigation of Coal-fired Thermal Power Plants: A Case Study, International Journal of Industrial Engineering Computations, 3(3): 423-434.

Eti M.C., Ogaji S.O.T. and Probert S.D., 2007. Integrating Reliability, Availability, Maintainability and Supportability with Risk Analysis for Improved Operation of The Afam Thermal Power-Station, Applied Energy, 84(2): 202-221.

Murtala A.Z., Babatunde A.A., Garegy B.B., Garba A.J. and Tola O.J., 2012. Reliability Evaluation of Kanji Hydro-Electric Power Statio in Nigeria, Journal of Energy

Technologies and Policy, 2(2): 15-31.

Sarkar A., Kumar Bahera D., Kumar S. and Singha M., 2012. Reliability Assessment of Rukhia Gas Turbine Power Plant in Tripura, International Journal of Current Engineering and Technology, 2(1): 184-195.

Suleiman K., Ali U.A. and Yusuf I., 2013. Stochastic Analysis and Performance Evaluation of a Complex Thermal Power Plant, Innovative Systems Design and Engineering, 4(15): 21-32.

O'Connor P. and Kleyner A., 2012. Practical Reliability Engineering, 5th ed., Chichester, West Sussex: Wiley.

Benbow D. and Broome H., 2013. The Certified Reliability Engineer Handbook, 2nd ed., Milwaukee, Wisconsin: ASQ Quality Press.

Downloads

Published

2019-05-15

How to Cite

Selvaraju, S., & Abdul Hamid, M. F. (2019). Reliability, Availability and Maintanability Study of A Power Generation Plant. Jurnal Mekanikal, 41(2-S). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/345

Similar Articles

<< < 7 8 9 10 11 12 13 14 15 16 > >> 

You may also start an advanced similarity search for this article.