Joining of Dissimilar Material Using Gas Metal Arc Welding

Authors

  • Muhamad Syafiq S. Mahadi School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor
  • Norizah Hj. Redzuan School of Mechanical Engineering, Faculty of Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor

Keywords:

Joining dissimilar material, thin sheet welding, welding parameter, gas metal arc welding

Abstract

Joining of thin sheet metals by welding was once said to be difficult as it usually burns through hole at the base metal. High welding temperature exerted on the base metal lead to cause undesirable distortion. Further challenges on joining of dissimilar materials by using fusion welding are when both base metals have different melting temperature and also might lead to breakdown of their mechanical properties. This research objective was to study the weldability of dissimilar selected metals sheet namely mild steel and galvanized iron. It was to determine the suitable welding parameters to join both metals sheet with thickness of 1.0 mm, each.  Two welding parameters identified as the welding current with a range of 34.0 – 55.5 A and wire feed speed ranging from 2.0 – 4.0 m/min, the Gas Metal Arc Welding (GMAW) process was thus employed. The samples were later tested for its tensile strength in order to get the safe welding parameter that could meet the tensile strength of the joint. It was determined that the range of safe GMAW welding parameters for both metals was 44.9 – 55.5 A of the welding current and 3.0 m/min wire feed speed.

References

Tadamalle A.P., Reddy Y.P., Ramjee E. and Reddy K.V., 2017. Characterization of Stainless Steel and Galvanized Iron 0.5 mm Thick Laser Weld Joints, International Journal of Advanced Manufacturing Technology, 90(1–4): 383–395.

Manoj S., Dharminder S. and Dharmpal D., 2010. Parametric Optimization of Gas Metal Arc Welding Processes by Using Factorial Design Approach, Journal of Minerals & Materials Characterization & Engineering, 9(4): 353-363.

Kumar N., Yuan W. and Mishra R.S., 2015. Chapter 2 - A Framework for Friction Stir Welding of Dissimilar Alloys and Materials, In Kumar N., Yuan W. and Mishra R.S. (Eds.) Friction Stir Welding and Processing, Friction Stir Welding of Dissimilar Alloys and Materials, 15-33, Butterworth-Heinemann.

Selvi S., Vishvaksenan A. and Rajasekar E., 2018. Cold Metal Transfer (CMT) Technology - An Overview, Defence Technology, 14(1): 28-44.

Hänninen H., Aaltonen P., Brederholm A., Ehrnstén U., Gripenberg H., Toivonen A., Jorma P., Virkkunen I., 2006. Dissimilar Metal Weld Joints and Their Performance in Nuclear Power Plant and Oil Refinery Conditions, VTT Tiedotteita - Meddelanden - Research Notes, VTT Technical Research Centre of Finland.

WinSteel Prof - Subscription ver. 7.1.13.4 (Igor Terminal / 18.6.2020), Q235A Included in 3 standards (China), 4, 19–20. Retrieved from: https://www.metaldata.info /reports/Q235A.pdf. [Accessed: 1 January 2020].

Weld Joint Preparation (ISO 9692), Retrieved from: http://triblab.teipir.gr/ files/Welding/Lab/CH3_2_Welding_joint_preparation.pdf. [Accessed: 19 October 2019].

Walsh C.T., Sandstead H.H., Prasad A.S., Newberne P.M. and Fraker P.J., 1994. Zinc: Health Effects and Research Priorities for the 1990s, Environmental Health Perspectives, 102 (Suppl 2): 5–46.

Kuschner W.G., D'Alessandro A., Wintermeyer S.F., Wong H., Boushey H.A. and Blanc P.D., 1995. Pulmonary Responses to Purified Zinc Oxide Fumes, Journal of Investigative Medicine, 43: 371-378.

Robert Sabin, Zinc Activated Profile, COPE, March/April 1995: 16,17.

Sperko Engineering Services, Inc., 1999. Welding Galvanized Steel -- Safely, Retrieved from: https://docplayer.net/20736507-Welding-galvanized-steel-safely.html. [Accessed: 1 September 2019].

Cao R., Yu G., Chen J.H. and Wang P., 2013. Cold Metal Transfer Joining Aluminum Alloys-to-galvanized Mild Steel, Journal of Materials Processing Technology, 213(10): 1753–1763.

Kobayashi S. and Yakou T., 2002. Control of Intermetallic Compound Layers at Interface Between Steel and Aluminum by Diffusion-treatment, Materials Science and Engineering: A, 338(1–2): 44-53.

Downloads

Published

2020-12-19

How to Cite

S. Mahadi, M. S., & Hj. Redzuan, N. (2020). Joining of Dissimilar Material Using Gas Metal Arc Welding. Jurnal Mekanikal, 43(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/412

Issue

Section

Mechanical

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.