ACTIVE FORCE CONTROL WITH INPUT SHAPING TECHNIQUE FOR A SUSPENSION SYSTEM

Authors

  • Mohd Zarhamdy Md Zain Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
  • Musa Mailah Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
  • G. Priyandoko G. Priyandoko Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.

Keywords:

Active force control (AFC), input shaping (IS), vibration, suspension system.

Abstract

This paper describes an approach to investigate and develop a hybrid control scheme for vibration suppression of a vehicle suspension system. Initially, an active force control (AFC) scheme is developed for the motion control of the system. This is then extended to incorporate a feed forward controller based on an input shaping (IS) technique for the control of vibration of the suspension system that could in turn lead to the enhancement of the riding performance of the vehicle. Simulation results of the response of the suspension system with the proposed control scheme are presented in time and frequency domains. The performance of the hybrid control scheme with AFC and IS control are particularly assessed in terms of the level of vibration reduction.

References

M.V.C. Rao, V. Prahlad, 1997. A Tunable Fuzzy Logic Controller for Vehicle Active Suspension Systems, Fuzzy Set and System.

Chantranuwathana, S.; Peng, H., 2004. Adaptive Robust Force Control for Vehicle Active Suspensions, International Journal of Adaptive Control and Signal Processing, Vol. 18, pp. 83-102.

A. Alleyne, R. Liu, H. Wright, 1998. On the Limitations of Force Tracking Control for Hydraulic Active Suspensionsâ€, Proc. Of the American Control Conference, Philadelphia, Pennsylvania, June.

A.J. Barr, J.I Ray, 1996. Control of an Active Suspension using Fuzzy Logic, Proceedings of the Fifth IEEE International Conference on Fuzzy Systems, Vol. 1, pp. 42 – 48, vol.1, 8-11 Sept.

J. Campos, F.L. Lewis, L. Davis, S. Ikenaga, 2000. Backstepping Based Fuzzy Control of Active Vehicle Suspension Systems, American Control Conference,

Proceedings of the 2000, Volume: 6, 28-30 June.

Huang, S.J., Lin, W.C., 2003. A Self Organizing Fuzzy Controller for an Active Suspension System, Journal of Vibration and Control, vol. 9, no. 9.

Son, S., Isik, C., 1996. Application of Fuzzy Logic Control to an Automotive Action Suspension System, Proc. of the Fifth Int. Conf. on Fuzzy Systems, pp. 548-553

D’Amato, F., Viassolo, D.E., 2000. Fuzzy Control for Active Suspensions, Mechatronics, vol.10, pp. 897-920.

Kuo, Y.P., Li, T.S., 1999. GA-based Fuzzy PI/PD Controller for Automotive Active Suspension System, IEEE Transactions on Industrial Electronics, Vol. 46, No. 6, December.

Mailah, M., Priyandoko, G., 2007. Simulation of A Suspension System With Adaptive Fuzzy Active Force Control, International Journal on Simulation Modelling, Vol. 6, No.1, pp. 25-36

Hewit, J. R. and Burdess, J. S., 1981. Fast Dynamic Decoupled Control for Robotics using Active Force Control. Trans. Mechanism and Machine Theory,

(5), pp. 535-542.

Mailah, M., 1998. Intelligent Active Force Control of a Rigid Robot Arm Using Neural Network and Iterative Learning Algorithms. University of Dundee, UK: Ph.D Thesis.

S.B.Hussein, A.M.S. Zalzala, H. Jamaluddin, M. Mailah, 2000. An Evolutionary Neural Network Controller for Intelligent Active Force Control, Evolutionary Design and Manufacture, Ed. I.C. Parmee, Springer Verlag, London, pp 352-362.

Mailah, M., Pitowarno, E., Jamaluddin, H., 2005. Robust Motion Control for Mobile Manipulator Using Resolved Acceleration and Proportional-Integral Active Force Control, International Journal of Advanced Robotic Systems, Vol. 2, No. 2, pp. 125-134.

Burdess, J. S., Hewit, J. R., 1986. An Active Method for the Control of Mechanical Systems in the Presence of Unmeasurable Forcing, Trans. Mechanism and Machine Theory, vol. 21, no. 3, pp. 393-400.

Mailah, M., Hewit, J.R., Meeran, S., 1996. Active Force Control Applied to A Rigid Robot Arm, Jurnal Mekanikal, Vol.2, No.2, pp. 52-68.

Pitowarno, E., Mailah, M., Jamaluddin, H., 2002. Knowledge-Based Trajectory Error Pattern Method Applied to An Active Force Control Scheme, International Journal of Engineering and Technology, Vol. 2, No.1, pp. 1-15.

M.Z. Mohd Zain, M.O. Tokhi and Z. Mohamed, 2006. Hybrid learning control schemes with input shaping of a flexible manipulator system, Mechatronics, 16, pp. 209-219.

Downloads

Published

2018-04-05

How to Cite

Md Zain, M. Z., Mailah, M., & G. Priyandoko, G. P. (2018). ACTIVE FORCE CONTROL WITH INPUT SHAPING TECHNIQUE FOR A SUSPENSION SYSTEM. Jurnal Mekanikal, 27(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/133

Issue

Section

Mechanical

Similar Articles

<< < 6 7 8 9 10 11 12 13 14 15 > >> 

You may also start an advanced similarity search for this article.