DESIGN OPTIMIZATION OF ROBOT CHASSIS USING PROTOTYPING PROCESS
Keywords:
Rapid prototyping, Design optimization, Part orientationAbstract
This paper presents the optimization of robot chassis design using Fused Deposition Modeling
rapid prototyping process. In this work, the optimal design is determined by the time consumed
and the material needed during the building process. Building time and material needs both for
support and model depend on the part's configuration and orientation. The methodology involves several design phases and was concluded by a ready-made product or prototype. Process of optimization is based on best orientation guideline form by Jacobs's. Although the process is different but the guideline is applicable to the case studied. As a result, the best optimal robot chassis is identified.
References
Ulrich, K. T. and Eppinger, S. D., 1995, "Product Design and Development", Mc-Graw Hill, Inc.
Bablani, M. and Bagchi, A., 1995, "Quantification of errors in Rapid Prototyping Processes and Determination of Preferred Orientation of Parts", Trans. N. Am. Manu! Research Inst. SME XXIII, pp. 319-324.
Allen, S. and Dutta, D., 1994, "On the Computation of Part Orientation Using Support Structure in Layered Manufacturing", Technical Report UMMEAM- TR-94-15, Dept. of Mech. Eng., University of Michigan, MI.
Frank, D. and Fadel, G., 1995, "Expert System-Based Selection of the Preferred Direction of Build for Rapid Prototyping Processes", 1. Intelligent Manufacturing, 6 (5), pp. 339-345.
Sreeram, P. N. and Dutta, D., 1994, "Determination of Optimal Orientation Based on Variable Slicing Thickness in Layered Manufacturing", Technical Report UM-MEAM-TR-94- 14, Dept. of Mech. Eng ., University of Michigan, MI.
Rattanawong, W., Masood, S. H. and Iovenitti, P., 2001, "A Volumetric Approach to Part Orientation in Rapid Prototyping", 1. Material Processing Technology, 119, pp. 348-353.
Masood, S. H., Ratttanawong, W. and Iovenitti, P., 2003, "A Generic Algorithm for a Best Part Orientation System for Complex Parts in Rapid Prototyping ", J. of Materials Processing Technology, 6730, pp. 1-7. (Article in Press) .
Anne, M. and Dutta, D., 1997, "Survey of Process Planning Techniques for Layered Manufacturing", Proc. of DETC 1997, California. DETC97 DAC3988.
Masood, S. H. and Lim, B. S., 2001, "Concurrent Intelligent Rapid Prototyping Environment", 1. Intelligent Manufacturing, 6 (5), pp. 291-310.
Jacob, P. F., (1994), "Rapid Prototyping and Manufacturing: Fundamentals of Stereolithography" , Society of Manufacturing Engineers.
Downloads
Published
How to Cite
Issue
Section
License
Copyright of articles that appear in Jurnal Mekanikal belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.