Experimental Investigation of Tensile Properties of Eco-composite Laminates

Authors

  • Haris Ahmad Israr Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor
  • Koh Jian Cheng Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor
  • King Jye Wong Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru Johor
  • Khong Wui Gan Faculty of Engineering and the Environment University of Southampton Malaysia Campus (USMC) 79200 Iskandar Puteri Johor

Keywords:

Composite, eco-hybrid, eco-composite, natural fiber, tensile test

Abstract

Natural fiber composites are green composites that are renewable and sustainable towards the environment. It has low density which results in a good specific strength. With the current trending to lower the dependency on petroleum-based products, it leads to investigation on the environmental friendly materials to replace the conventional fibers. Therefore, natural fibers are hybridized with conventional fibers to form eco-composite laminates. Eco-composites have ecological and environmental advantages compared to synthetic composites while its strengths are comparable to the synthetic composites. However, not many studies have been done on the mechanical properties of this type of eco-composites. This paper presents the tensile properties of eco-composites consisting of flax-carbon/epoxy laminates in sandwich-like and intercalation configurations. From the tensile tests, the eco-composites strengths are comparable to the synthetic composite laminates. For eco-composite laminates, sandwich-like configurations are found to have better properties compared to the intercalation counterpart.

References

La Mantia F.P and Morreale M., 2011. Green Composites: A Brief Review, Composite Part A, 42: 579-588.

Yap C.T.M., Israr H.A. Wong K.J. and Yahya M.Y., 2016. Compressive Properties of Hawaiian Gold Timber Bamboo under Different Conditions, Journal of Advanced Research in Applied Mechanics, 25: 10-18.

Pickering K.L., Efendy M.G. and Le T.M., 2015. A Review of Recent Developments in Natural Fiber Composites and Their Mechanical Performance, Composites Part A, 83: 98–112.

Yap C.T.M., Wong K.J. and Israr H.A., 2017. Mechanical Properties of Bamboo and Bamboo Composites: A Review, Journal of Advanced Research in Material Science, 35: 7-26.

Faruk O., Bledzki A.K., Fink H.-P. and Sain M., 2012. Biocomposites Reinforced with Natural Fibers: 2000–2010, Prog. Polym. Sci., 37(11): 1552–1596. 6. Hill C. and Hughes M., 2010. Natural Fiber Reinforced Composites Opportunities and Challenges, Journal of Biobased Materials and Bioenergy, 4(2): 148-158.

Jusoh M.S.M., Israr H.A. and Yahya M.Y., 2017. Indentation and Low Velocity Impact Properties of Woven E-glass Hybridization with Basalt, Jute and Flax Toughened Epoxy Composites, Proceeding of 3rd International Conference on Power Generation systems and Renewable Energy Technologies, IEEE, Malaysia, 164-168.

Jusoh M.S.M., Santulli C., Yahya M.Y., Hussein N.S. and Israr H.A., 2016. Effect of Stacking Sequence on The Tensile and Flexural Properties of Glass Fiber Epoxy Composites Hybridized with Basalt, Flax or Jute Fibers, Mater. Sci. Eng. Adv. Res., 1(4): 19-25.

Indra Reddy M., Anil Kumar M. and Rama Bhadri Raju Ch., 2018. Tensile and Flexural Properties of Jute, Pineapple Leaf and Glass Fiber Reinforced Polymer Matrix Hybrid Composites, Materials Today: Proceedings, 5: 458–462.

Wong K.J., Zahi S., Low K.O. and Lim C.C., 2010. Fracture Characterisation of Short Bamboo Fiber Reinforced Polyester Composites, Materials and Design, 31: 4147–4154.

ASTM D3039/ D3039m, 2010. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, Annual Book of ASTM Standards, 1–16.

Bogoeva-Gaceva G., Avella M., Malinconico M., Buzarovska A., Grozdanov A., Gentile G. and Errico M.E., 2007. Natural Fiber Eco-composites, Polymer Composites, 28(1): 98-107.

Ku H., Wang H., Pattarachaiyakoop N. and Trada M., 2011. A Review on The Tensile Properties of Natural Fiber Reinforced Polymer Composites, Composite Part B, 42(4): 856-873.

Muralidhar B.A., 2012. Tensile and Compressive Properties of Flax-plain Weave Preform Reinforced Epoxy Composites, J. Reinf. Plast. Compos., 32(3): 207–213.

Zhang J., Chaisombat K., He S. and Wang, C.H., 2012. Hybrid Composite Laminates Reinforced with Glass/Carbon Woven Fabrics for Lightweight Load Bearing Structures, Mater. Des., 36: 75–80.

Asim M., Jawaid M., Abdan K., Ishak M.R. and Alothman O.Y., 2017. Effect of Hybridization on The Mechanical Properties of Pineapple Leaf Fiber/Kenaf Phenolic Hybrid Composites, J. Renew. Mater., 1(1): 1–9.

Downloads

Published

2019-05-09

How to Cite

Ahmad Israr, H., Jian Cheng, K., Jye Wong, K., & Wui Gan, K. (2019). Experimental Investigation of Tensile Properties of Eco-composite Laminates. Jurnal Mekanikal, 41(1). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/323

Issue

Section

Mechanical

Similar Articles

<< < 7 8 9 10 11 12 

You may also start an advanced similarity search for this article.