Structural Integrity Analysis of Fixed Offshore Jacket Structures

Authors

  • Zulkipli Henry Faculty of Mechanical Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor
  • Iberahin Jusoh Department of Mechanical Engineering Umm Al Qura University Makkah
  • Amran Ayob Faculty of Mechanical Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor

Keywords:

Offshore jacket structures, load analysis, structural response, stress utilization, foundation utilization

Abstract

Offshore structures which are used to support oil and gas exploration and production facilities are subjected to external loadings such as gravity loads, environmental loads, seismic loads, hydrodynamic loads and accident loads. Physically, the natural responses of the structures are specified in term of displacement and vibration. In this paper, the structural response to external loadings of an offshore structure operating in the Malaysian Water, is measured in terms of stress utilization at structural component level. Offshore structures are designed and assessed to meet the requirement as stipulated in international standards. The type of loading, structural assessment, structural response and utilization checks are discussed. The design of the jacket structure that is studied complies with code requirement with sufficient robustness to withstand either in-service condition or extreme condition.

References

LiuY.X,, SunC., Sun J.G., Li H.Y., Zhan W.F., Yang Y.H. and Zhang S.Y., 2016. Satellite Data Lift The Veil on Offshore Platforms in South China Sea, Scientific Reports.

Ayob M.S., Mukherjee K., Kajuputra A.E., Wong B.S. and Salleh F.M., 2014. Requalification of Offshore Jacket Structures in Malaysian Water, Offshore Technology Conference, OTC-25021-MS, Kuala Lumpur, Malaysia.

Etterdal B., Scherf I. and Grigorian H., 2001.Strengthening of Ekofisk Platforms to Ensure Continued and Safer Operation, OTC 13191, Houston, Texas.

Grigorian H., Scherf I., Yu W.C. and Christensen O., 2001, Cost-Efficient Structural Upgrade and Life Extension of Ekofisk Platforms with Use of Modern Reassessment Techniques, OTC 13187, Houston, Texas.

Shell Standard Engineering Specification SES 10.1 Rev. 4, Fixed Offshore Steel Structures.

American Petroleum Institute, API RP2A-LRFD, 1993, Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms – Load Resistance Factor Design.

DNV-RP-C205, 2010, Environmental Condition and Environmental Load.

SACS, 2005, Precede Release 6 User’s Manual, Engineering Dynamic, Inc.

Downloads

Published

2019-05-15

How to Cite

Henry, Z., Jusoh, I., & Ayob, A. (2019). Structural Integrity Analysis of Fixed Offshore Jacket Structures. Jurnal Mekanikal, 40(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/351

Issue

Section

Mechanical

Similar Articles

<< < 3 4 5 6 7 8 9 10 11 12 > >> 

You may also start an advanced similarity search for this article.