THE ELASTIC-PLASTIC PROPERTIES OF SYNTACTIC PERFORATED HOLLOW SPHERE STRUCTURES

Authors

  • Mohd Ayub Sulong Department of Solid Mechanics and Design Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 UTM Skudai, Johor Malaysia
  • I.V. Belova I.V. Belova Centre for Mass and Thermal Transport in Engineering Materials Centre for Geotechnical and Materials Modelling School of Engineering, the University of Newcastle Callaghan, NSW 2308, Australia
  • G.E. Murch G.E. Murch Centre for Mass and Thermal Transport in Engineering Materials Centre for Geotechnical and Materials Modelling School of Engineering, the University of Newcastle Callaghan, NSW 2308, Australia
  • Andreas Öchsner Centre for Mass and Thermal Transport in Engineering Materials Centre for Geotechnical and Materials Modelling School of Engineering, the University of Newcastle Callaghan, NSW 2308, Australia
  • Thomas Fiedler Centre for Mass and Thermal Transport in Engineering Materials Centre for Geotechnical and Materials Modelling School of Engineering, the University of Newcastle Callaghan, NSW 2308, Australia

Keywords:

Elastic-plastic, cellular material, finite element method, syntactic foam

Abstract

Hollow sphere structures are lightweight materials and belong to the group of cellular metals (such as metal foams). Metal foams exhibit a several interesting mechanical properties. This contribution investigates the elastic-plastic properties of a new type of hollow sphere structures. For this new type, the sphere shell is perforated by several holes in order to open the inner sphere volume for the matrix material. The effective elastic-plastic properties of syntactic (i.e. spheres embedded in a matrix) perforated sphere structures in a primitive cubic arrangement of unit cell models are numerically evaluated for a different filler fractions of the spheres. The results are compared to configurations without perforation and configurations where hollow spheres are only connected by so called “sintering necksâ€, i.e. not completely embedded in a supporting matrix. In the scope of this study, threedimensional finite element analysis is used in order to investigate unit cell models. The present investigation revealed that sintered arrangement of perforated hollow sphere structure is superior in terms of initial yield stress compared to the syntactic arrangement counterparts. The stronger structure possessed by sintered arrangement model is attributed to network of sphere morphology. The results also indicate a continuous cubic curve of 0.2% offset yield stress for syntactic and sintered arrangement models.

References

Banhart, J. and H.W. Seeliger, Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications. Advanced Engineering Materials, 2008. 10(9): p. 793-802.

Baumeister, E., S. Klaeger, and A. Kaldos, Lightweight, hollow-sphere-composite (HSC) materials for mechanical engineering applications. Journal of Materials Processing Technology, 2004. 155-156(0): p. 1839-1846.

Tasdemirci, A., Ç. Ergonenç, and M. Guden, Split Hopkinson pressure bar multiple reloading and modeling of a 316 L stainless steel metallic hollow sphere structure. International Journal

of Impact Engineering, 2010. 37(3): p. 250-259.

Fiedler, T., E. Solórzano, and A. Öchsner, Numerical and experimental analysis of the thermal conductivity of metallic hollow sphere structures. Materials Letters, 2008. 62(8–9): p.

-1207.

Merkel, M., Pannert W., Winkler R., On the Vibroacoustic Behaviour of HSS, Multifunctional Metallic Hollow Sphere Structures. 2009, Springer Berlin Heidelberg. p. 71-88.

M Vesenjak, T Fiedler, Z Ren, A Öchsner., Dynamic Behaviour of Metallic Hollow Sphere Structures Multifunctional Metallic Hollow Sphere Structures. 2009, Springer Berlin

Heidelberg. p. 137-158.

Hosseini, S.M.H., M. Merkel, and A. Öchsner, Finite element simulation of the thermal conductivity of perforated hollow sphere structures (PHSS): Parametric study. Materials Letters, 2009. 63(13-14): p. 1135-1137.

Hossein Hosseini, S. M., Merkel, M., Augustin, C., and Öchsner, A., Numerical Prediction of the Effective Thermal Conductivity of Perforated Hollow Sphere Structures, Defect and Diffusion Forum 2009. 283 - 286: p. 6-12.

Hosseini, S. M. H., and Ochsner, A., Predicting the effective thermal conductivity of perforated hollow sphere structures (PHSS), in Current Trends in Chemical Engineering,

J.M.P.Q.D. (Ed.), Editor. 2010, Studium Press LLC: Houston. p. 131–151.

Öchsner, A., S.M.H. Hosseini, and M. Merkel, Numerical Simulation of the Mechanical Properties of Sintered and Bonded Perforated Hollow Sphere Structures (PHSS). Journal of

Materials Science & Technology, 2010. 26(8): p. 730-736.

Ferrano, F., Speich, M., Rimkus, W., Merkel, M., & Öchsner, A., Simulation of the Impact Behaviour of Diffusion-Bonded and Adhered Perforated Hollow Sphere Structures (PHSS). Defect and Diffusion Forum 2009. 294: p. 27-38.

Hosseini, S.M.H., A. Öchsner, and T. Fiedler, Numerical investigation of the initial yield surface of perforated hollow sphere structures (PHSS) in a primitive cubic pattern. Finite Elements in Analysis and Design, 2011. 47(7): p. 804-811.

Sulong, M.A. and A. Öchsner, Prediction of the elastic properties of syntactic perforated hollow sphere structures. Computational Materials Science, 2012. 53(1): p. 60-66.

Sulong, M.A. and A. Öchsner, Finite element simulation of the macroscopic heat conductivity of syntactic perforated hollow sphere structures,Materialwissenschaft und Werkstofftechnik,

43(5): p. 461-467.

De Graef, M. and M.E. McHenry, Structure of Materials: An Introduction to Crystallography, Diffraction and Symmetry. 2007: Cambridge University Press.

Öchsner, A. and K. Lamprecht, On the uniaxial compression behavior of regular shaped cellular metals. Mechanics Research Communications, 2003. 30(6): p. 573-579.

ISO 13314:2011(E) Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals. 2011.

Jeandrau, J.P., Analysis and design data for adhesively bonded joints. International Journal of Adhesion and Adhesives, 1991. 11(2): p. 71-79.

Downloads

Published

2018-04-01

How to Cite

Sulong, M. A., I.V. Belova, I. B., G.E. Murch, G. M., Öchsner, A., & Fiedler, T. (2018). THE ELASTIC-PLASTIC PROPERTIES OF SYNTACTIC PERFORATED HOLLOW SPHERE STRUCTURES. Jurnal Mekanikal, 37(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/37

Issue

Section

Mechanical

Similar Articles

<< < 12 13 14 15 16 17 18 > >> 

You may also start an advanced similarity search for this article.