Hydrodynamic Analysis of a Model Patrol Boat Hull

Authors

  • Balasubramaniam S. School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor
  • Musa M.N. School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor

Keywords:

Drag coefficient, computational fluid dynamic, virtual fluid domain

Abstract

This research was conducted with the intent of determining the drag coefficient and study the hydrodynamic behavior around the external body of a model patrol boathull with the aid of Computational Fluid Dynamic (CFD) software using ANSYS CFX version 17.2. The model patrol boatwas tested with four variations of speed at 16, 18, 20 and 22 knots in a virtual fluid domain. For the purpose of generating a 3D geometry of the model boat hull, SolidWorks software was used. A turbulent model was selected to simulate the flow field around the external body of the one-meter class sail boat. The final result for this researchisthe drag coefficient obtained for all variation of speeds. The validation of the results was done by comparing the drag coefficient value from simulation to the established drag coefficient data obtained from the Marine Technology Center (MTC),Universiti Teknologi Malaysia (UTM) on the exact model of a patrol boat used in the simulation.

References

Batchelor G.K., 2000. An Introduction to Fluid Dynamics, Cambridge University Press, UK.

Rana S., 2012. Introduction of Hydrodynamics and Its Application. Retrieved from: https://www.academia.edu/11743583/Introduction_of_Hydrodynamics_and_its_Application. [Accessed: 25July 2019].

Naval hydrodynamics and hydrodynamic wave ship resistance to the advancement. Ship Hydrodynamics. Retrieved from: https://www.mecaflux.com/en/hydrodynamique_navale.htm. [Accessed: 1 August 2019].

Techet A.H., 2002. Hydrodynamics for Ocean Engineering. Retrieved from:https://dspace.mit.edu/handle/1721.1/35850?show=full. [Accessed: 25 July 2019].

TechetA.H., 2005. 2.016 Hydrodynamics, Retrieved from: https://ocw.mit.edu/courses/mechanical-engineering/2-016-hydrodynamics-13-012-fall-2005/readings/2005reading7.pdf. [Accessed: 25 July 2019].

Scobie J.A., Sangan C.M, Lock G.D., 2014. Flow Visualisation Experiments on Sports Balls,Procedia Engineering, 72: 738-743.

Epifanov V.M, Klimov A.A. and Trdatyan S.A., 1993. Boundary Layer on a Plate with Directed Injection into the Laminar Stream in Kelleher M.D., Sreenivasan K.R., Shah R.K. and Joshi Y. (Eds), Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1993, Elsevier Science.

Real World Physics Problems. Retrieved from: https://www.real-world-physics-problems.com/drag-force.html. [Accessed: 15August 2019].

MollandA.F., TurnockS.R. and HudsonD.A.,2017.Ship Resistance and Propulsion with Practical Estimation of Propulsive Power, 2nd Edition, Cambridge University Press.

Wortley S., 2013. CFD Analysis of Container Ship Sinkage, Trim and Resistance, BEng Mechanical Engineering Project Report, Curtin University.

LEAP CFD Team, 2012. Tips & Tricks: Convergence and Mesh Independence Study. Retrieved from: https://www.computationalfluiddynamics.com.au/convergence-and-mesh-independent-study/. [Accessed: 15 August 2019].

Downloads

Published

2020-09-20

How to Cite

S., B., & M.N., M. (2020). Hydrodynamic Analysis of a Model Patrol Boat Hull. Jurnal Mekanikal, 42(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/388

Issue

Section

Mechanical

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.