IMPLEMENTATION OF TOTAL PRODUCTIVE MAINTENANCE CONCEPT IN A FERTILIZER PROCESS PLANT

Authors

  • Khairul Hafiz Norddin Mohd Norddin Department of Industrial and Production Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
  • Muhamad Zameri Mat Saman Department of Industrial and Production Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.

Keywords:

Total productive maintenance (TPM), maintenance management system framework, bucket conveyor EL102

Abstract

Machine breakdown due to unplanned maintenance (sudden failure) will increase the repair cost and machine downtime (production lost). This has brought the function of maintenance to be an important activity in the manufacturing industry in order for daily operation to become stable. The introduction of several philosophies such as Corrective Maintenance (CM), Preventive Maintenance (PM) or Total Productive Maintenance (TPM) have allowed extra solutions to a process planning problem faced by company in comparison to the conventional fire-fighting syndrome. This main purpose of this study was to focus on developing a framework of maintenance strategy as guidelines for Mechanical Section in Engineering Department for Malaysian NPK Fertilizer Sdn. Bhd. (MNFSB) located in Gurun Industrial Estate, Kedah. From an extensive review of literature for Total Productive Maintenance (TPM), twelve disciplines beginning with basic to advanced elements were identified for effective Maintenance Management Systems. To demonstrate the validity of this study, it was tested by implementing it on actual equipment, namely as Bucket Conveyor, EL102 as a case study.

References

Abdul Rahim, A. R. and Nabi Baksh, M. S. (2003). New Product Development Framework for Engineer-to-Order (ETO) Products. European Journal of Innovation Management. Vol. 6 No. 3, pp. 182-196.

Al-Najjar B. and Alsyouf, I. (2004). Enhancing Company Profitability and Competitiveness Using Integrated Vibration-Based Maintenance: A Case Study. European Journal of Operational Research. Vol. 157, pp. 643-657.

Alsyouf, I. (2009). Maintenance Practices in Swedish Industries: A Survey Result. International Journal of Production Economics. Vol. 121, pp. 212-223.

Angeles, R. S. (2009). World Class Maintenance Management – The 12 Disciplines. Central Books Supply Inc.

Bakhrankova, K. (2010). Decision Support System for Continuous Production. Industrial Management & Data Systems, Vol. 110, pp. 591 – 610.

Blank, R. (2004). The Basics of Reliability. University Park, IL: Productivity Press.

Caputo, A. C. and Salini P. (2009). Influence of Preventive Maintenance Policy on Manufacturing Systems Performances. Proceedings of World Congress on Engineering Vol. 1.

Carnero, M. C. (2006). An Evaluation System of the Setting Up of Predictive Maintenance. Reliability Engineering and System Safety. Vol. 91, pp. 945-963.

Clarotti, C. A. (2004). Detection of equipment aging and determination of the efficiency of a corrective measure. Elsevier.

Eti, M. C., Ogaji, S. O. T. and Probert, S. D. (2006). Reducing Cost of Preventive Maintenance (PM) Through Adopting a Proactive Reliability-focused Culture. Applied Energy. Vol. 83, pp. 1235-1248.

Hung, M. H., Chen, K. Y., Ho, R. W. and Cheng, F. T. (2003). Development of an e-Diagnostics/Maintenance Framework for Semiconductor Factories with Security Considerations. Advanced Engineering Informatics. Vol. 17, pp. 165-178.

Jonathan, S. T. and Mark A. K. (1997). A General Framework for PM Pptimization in Chemical Process Operations. Computer Chemical Engineering. Vol. 21, No.12, pp. 1451-1469.

Labib, A. W. (1998). World Class Maintenance Using a Computerized Maintenance Management System. Journal of Quality and Maintenance Engineering. Vol. 4 No.1, pp 66-75.

Liao, G. L. and Shaw, B. L. (2009). Optimal Maintenance Policy to Support the Operation of Manufacturing With Minimum and Delayed Repair. International Journal of Reliability, Quality and Safety Engineering. Vol.16 No.3, pp. 235-247.

Mang, T. and Dressel, W. (2007). Lubricants and Lubrication. Wiley-VCH GmBH, Weinheim.

Naagarazan, R. S. and Arivalagar, A. A. (2005). Total Quality Management. New Age International.

Nakajima, S. (1988). Introduction to TPM: Total Productive Maintenance. Productivity Press.

Percy, M. and Kobbacy, K. (2000). Modern statistical and mathematical methods in reliability. Wiley Publishing.

Pham, H. and Wang, H. (1996). Imperfect Maintenance. European Journal of Operational Research. Vol. 94, pp. 425-438.

Philips, A. H. et. al. (2004). A Survey on Condition Monitoring Systems in Industry. Proceedings of ESDA.7th Bienniel ASME Conference Engineering System Design and Analysis.

Ramayah, T., Lazim, H. M., Ahmad, N. and Abdul Hamid, K. (2009). Total Employees Participation in a Maintenance Activity. A Case Study of Autonomous Maintenance Approach. Malaysia Labour Review. Vol 3 No.2, pp 47-62.

Robinson, C. J. and Ginder, A. P. (2002). Implementing TPM. Productivity Press.

Roberts, J. (2000). TPM: Total Productive Maintenance. History and Basic Implementation Process. Wiley Publishing.

Tang, C. M. and Raghavan, N. (2008). A Framework to Practical Predictive Maintenance Modeling for Multi-state Systems. Reliability Engineering and System Safety. Vol. 93, pp. 1138-1150.

Venkataraman, J. (2007). Maintenance Engineering and Management. PHI Learning Pvt. Ltd.

Waeyenbergh, G. and Pintelon, L. (2002). A Framework for Maintenance Concept Development. International Journal of Production Economics. Vol. 77, pp. 299-313.

Waeyenbergh, G. and Pintelon, L. (2004). Maintenance Concept Development: A Case Study. International Journal of Production Economics. Vol. 89, pp. 395-405.

Wu, S. and Clements-Croome, D. (2005). Preventive Maintenance Models with Random Maintenance Quality. Reliability Engineering and System Safety. Vol.

, pp. 99-105.

Yusof, S. M., Deros, B. M. and Salleh, A. M. (2006). A Benchmarking Implementation Framework for Automotive Manufacturing SMEs. Benchmarking : An International Journal. Vol. 13 No. 4, pp. 396-430.

Downloads

Published

2018-04-02

How to Cite

Mohd Norddin, K. H. N., & Mat Saman, M. Z. (2018). IMPLEMENTATION OF TOTAL PRODUCTIVE MAINTENANCE CONCEPT IN A FERTILIZER PROCESS PLANT. Jurnal Mekanikal, 34(1). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/79

Issue

Section

Mechanical

Similar Articles

<< < 10 11 12 13 14 15 16 17 > >> 

You may also start an advanced similarity search for this article.