SEAKEEPING ANALYSIS OF A FISHING VESSEL OPERATING IN MALAYSIAN WATER

Authors

  • Adi Maimun Department of Marine Technology Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor
  • Omar Yaakob Department of Marine Technology Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor
  • Md. Ahm Kamal Department of Marine Technology Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor
  • Ng Chee Wei Department of Marine Technology Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor

Keywords:

Seakeeping, response amplitude operator (RAO), full-scale measurement, wave spectra

Abstract

Seakeeping analysis is important in assessing the performance of floating structure in
waves. To perform Seakeeping calculations, the wave characteristics as well as the
response of the vessel are needed. The analysis normally requires reliable computer
programs to calculate response amplitude operator (RAO) and accurate seaway
representation. For seaway representation, theoretical spectra can be used but it is more
preferable to use the measured spectra which can be obtained through full scale
measurement. On the other hand theoretical spectra can be used for comparison.
This paper presents the results of a full-scale measurement of wave and vessel motions
taken from a Malaysian fishing vessel. The vessel operates off the East Coast of
Peninsular Malaysia. Wave buoy was used to measure wave data and Vessel Motion
Monitoring System (VMMS) was used to measure the vessel motions. They are basically
composed of a set of accelerometers gyroscopes and wind sensors. The data processing
and analyzing is done using LabVIEW software. Finally, the main analysis of the results
obtained is in the form of spectral analysis of wave and vessel motions. From them the
RAO can be obtained, which is the key to all Seakeeping analysis.

References

Denis, S.M. and Pier son, W.J., 1955, On the Motion of Ships in Confused Seas, Trans. SNAME, vol. 63, pp. 386-435.

Ursell, F., 1949, On the Heaving Motion ofa Circular Cylinder in the Surface of a Fluid, QJMAM.

Hoffman, D. and Fitzgerald, V., 1978, Systems Approach to Offshore Crane Ship Operations, SNAME Trans., vol. 86.

Soares, G.C. and Trovao, M.F.S., 1992, Sensitivity of Ship Motion to Wave Climate Description, International Shipbuilding Progress, vol. 39, no. 418 .

Yaakob, O. and Maimun, A.M ., 2001, Applicability of Theoretical Sea Spectra on Motion Studies of Floating Structures in Malaysian waters, First Asia Pacific Conference on offshore systems, Kuala Lumpur, Malaysia. 23-26 April.

Sarioz, K. and Narli, E., 2004 , Effect of Criteria on Seakeeping Performance Assessment, Elsevier Ireland Ltd .

Anon , 1996, Vessel Motion Monitoring System (VMMS) User Manual, WNI Science and Engineering.

Chakrabarti, S.K. , 1987, Hydrodynamics of Offshore Structures, New York, Computational Mechanics Publications, pp. 86-122.

Gran, S., 1991, A course in Ocean Engineering, Elsevier Science Publishers B.V., The Netherlands.

Downloads

Published

2018-04-22

How to Cite

Maimun, A., Yaakob, O., Kamal, M. A., & Wei, N. C. (2018). SEAKEEPING ANALYSIS OF A FISHING VESSEL OPERATING IN MALAYSIAN WATER. Jurnal Mekanikal, 22(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/181

Issue

Section

Mechanical

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.