PROCESS PERFORMANCE MONITORING IN PEWTER MANUFACTURING

Authors

  • Hamidon Musa Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor
  • Thean Chan Tan Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Johor Bahru, Johor

Keywords:

Keywords

Abstract

This paper reports a study on the casting parameters ofpewter based on
the Taguchi Approach. The quality attributes investigated are shrinkage,
hardness and microstructure. The paper also reports a study on
minimum section thickness producable by gravity casting and
centrifugal casting of pewter components. Additionally, the paper
presents results ofa study onfinish turning ofpewter.

References

Roy, Ranjit K., A Primer on The Taguchi Method, New York: Van

Nostrand Reinhold, 1990.

Tan, Thean Chan, Pewter Manufacturing Process, B. Eng Thesis, Universiti Teknologi Malaysia, 1998.

Downloads

Published

2018-05-21

How to Cite

Musa, H., & Chan Tan, T. (2018). PROCESS PERFORMANCE MONITORING IN PEWTER MANUFACTURING. Jurnal Mekanikal, 6(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/288

Issue

Issue 6: December 1998

Section

Mechanical

License

Copyright of articles that appear in Jurnal Mekanikal belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.

Similar Articles

1 2 3 4 5 6 7 > >> 

You may also start an advanced similarity search for this article.