Ergonomics and Noise Hazard at Wood Based Furniture Industry

Authors

  • Augeny Satik anak Ayak Faculty of Mechanical Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor
  • Jafri Mohd Rohani Faculty of Mechanical Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor
  • Affandi Mohd Zainal Faculty of Mechanical Engineering Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor

Keywords:

Ergonomics, noise hazard, furniture industry, RULA, REBA

Abstract

The paper underlines the initial work that is aimed at investigating the critical process and work-related symptoms that contribute to ergonomic and noise hazard furniture production industry. The effectiveness of the current existing control measures are also identified. Furniture industry is a manufacturing industry that employs a large workforce. There are many cases of occupational health diseases reported in 2016 from the manufacturing sector in Malaysia. The highest diseases reported are noise-induced hearing loss and musculoskeletal disorders. Therefore, in this project, the focus is on the ergonomic and noise hazards in the furniture industry in Malaysia. The project will be done by using three methodologies. The methodologies are four sections questionnaire or survey, direct observation using RULA and REBA, and direct measurement to measure the noise exposure level in the working place.

References

Ratnasingam J., Ioras F. and Ishak M.K., 2011. Migrant Contract Workers and Occupational Accidents in The Furniture Industry, Journal of Applied Sciences, 11(14): 2646-2651. 2. Ratnasingam J., Ioras F. and Bennet M., 2010. Determinants of Workers Health and Safety in The Malaysian Wooden Furniture Industry, Journal of Applied Sciences, 10(5): 425-430. 3. Jerie S., 2012. Occupational Health and Safety Problems Among Workers in The Wood Processing Industries in Mutare, Zimbabwe, Journal of Emerging Trends in Economics and Management Sciences (JETEMS), 3(3): 278-285. 4. Rampal K.G. and Nizam J.M., 2006. Developing Regulations for Occupational Exposures to Health Hazards in Malaysia, Regul. Toxicol. Pharmacol., 46(2): 131-135. 5. Shikdar A.A. and Sawaqed N.M., 2003. Worker Productivity and Occupational Health and Safety Issues in Selected Industries, Computers & Industrial Engineering, 45(4):563-572.

Bridger R., 2003. Introduction to Ergonomics, London: Taylor & Francis.

Department of Occupational Safety and Health Malaysia, 2017. Guidelines on Ergonomics Risk Assessment at workplace. Retrieved from http://www.dosh.gov.my/index.php/en/factory-machinery/garis-panduan/ergonomik/2622-01-guidelines-on-ergonomics-risk-assessment-at- workplace-2017-1?path=garis-panduan/ergonomic

Nejad N.H., Choobineh A., Rahimifard H., Haidari H.R. and Tabatabaei S.H., 2013. Musculoskeletal Risk Assessment in Small Furniture Manufacturing Workshops, International Journal of Occupational Safety and Ergonomics (JOSE), 19(2): 275-284.

Murphy W.J. and Franks J.R., 2002. Revisiting The NIOSH Criteria for A Recommended Standard: Occupational Noise Exposure. Journal of The Acoustical Society of America - J ACOUST SOC AMER III, 2397.

Owoyemi M.J., Falemara B.C. and Owoyemi A.J., 2016. Noise Pollution and Control in Wood Mechanical Processing Wood Industries, DOI: 10.20944/preprints201608.0236.v1 1-11.

Minja B., Moshi N. and Riwa P., 2003. Noise Induced Hearing Loss Among Industrial Workers in Dar Es Salaam, East African Medical Journal, 80(6):298-302.

Comper M.L. and Padula R., 2013. Ergonomic Risk Assessment Among Textile Iindustry Workers using Two Instruments: Quick Exposure Check and Job Factors Questionnaire. Educação e Pesquisa, 20:215-221.

Gauthier F., Gelinas D. and Marcotte P., 2012. The Vibration of Portable Orbital Sanders and Its Impact on The Development of Work-Related Musculoskeletal Disorders in The Furniture Industry, Computers & Industrial Engineering, 62(3):762-769.

Reinhold K. and Tint P., 2009. Hazard Profile in Manufacturing: Determination of Risk Levels Towards Enhancing The Workplace Safety, Journal of Environmental Engineering and Landscape Management, 17(2):69-80.

Downloads

Published

2019-05-15

How to Cite

anak Ayak, A. S., Mohd Rohani, J., & Mohd Zainal, A. (2019). Ergonomics and Noise Hazard at Wood Based Furniture Industry. Jurnal Mekanikal, 40(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/353

Issue

Section

Mechanical

Similar Articles

1 2 3 4 5 > >> 

You may also start an advanced similarity search for this article.