Development of Aerator for Water Saving

Authors

  • Hasnol M.Z. School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor
  • Ahmad Zaharuddin M.F. School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor

Keywords:

Water saving, product development, water separator, aerator, ablution

Abstract

Global technology keepson improving continually from time to time especially in product design and development. In this work, a proposed spray aerator design was implemented in an effort to adopt an initiative related to the water savingpolicy. This paper presents an experimental method of evaluation to develop the aerator used in ablution (wudhu’ in Islamic practice) to improve the water saving activity. Results showed that the proposed aeratordesign improved the water efficiencyof the flowrate by 88% compared tothe earlier design and deemed to have more potentials to obtain higher economic benefits. The improveddesign managed to reducethe water flowrate and consumption at a desirable level. The recorded data provided information on the duration and volume of the water consumption per use and it was deemed helpful in evaluating the human behaviour during ablution. The study also highlights the fabrication of the aerator using polymeric materials with the aid if a 3D printing process. The results were acquired from the simulation and later analysed using theANSYS FLUENT Version 19.2 software. Finally, the optimum conditions for promoting the effectiveness in term of saving is to support the water management activities were established, taking into account the beneficial role of water consumption.

References

Guppy L. and Anderson K, 2017. Global Water Crisis: The Facts, United Nations University Institute for Water, Environment and Health, Retrieved from: https://inweh.unu.edu/wp-content/uploads/2017/11/Global-Water-Crisis-The-Facts.pdf. [Accessed on 12 November 2019].

World Resource Institute, 2019. 17 Countries, Home to One-Quarter of the World's Population, Face Extremely High Water Stress, Retrieved from: https://www.wri.org/blog/2019/08/17-countries-home-one-quarter-world-population-face-extremely-high-water-stress. [Accessed on 12 November 2019].

Beal C., Stewart R.A., Huang T. and Rey E., SEQ Residential End Use Study Water, Journal of the Australian Water Association, 38 (2011): 80-84.

Seametrics, 2015. 5 Growing Trends in Water Conservation, Retrieved from: https://www.seametrics.com/blog/water-conservation-trends/. [Accessed on 12 November 2019].

Nair S., George B., Malano H., Arora M. and Nawarathna B., 2014. Water–energy–greenhouse Gas Nexus of Urban Water Systems: Review of Concepts, State-of-art and Methods, Resources, Conservation and Recycling, 89: 1–10.

Hoekstra E.E., 2014. Water Footprint Scenarios for 2050: A Global Analysis, Environment International, 64: 71-82.

Saimy I.S. and Mohamed Yusof N.A., 2013. The Need for Better Water Policy and Governance in Malaysia, Procedia-Social and Behavioral Sciences, 81:371-375.

Mohamad S., 2017. Saving Water in the Quest to Secure the Future, Retrieved from: http://www.wwf.org.my/?24665/Saving-Water-in-the-Quest-to-Secure-the-Future. [Accessed on 11 October 2019].

Fang K., Zhang Q., Yu H., Wang Y., Dong L. and Shi L., 2018. Sustainability of the Use of Natural Capital in a City: Measuring the Size, and Depth of Urban Ecological and Water Footprints, Science of the Total Environment, 631-632: 476-484.

Han S-Y., Kwak S.J. and Yoo S-H., 2008. Valuing Environmental Impacts of Large Dam Construction in Korea: An Application of Choice Experiments, Experimental Impact Assessment Review, 28:256-266.

Moore M-L.,von der Porten S., Plummer R., Brandes O. and Baird J., 2014. Water policy Reform and Innovation: A Systematic Review, Environmental Science& Policy, 28: 263-271.

Kamal A.M., 2008. Fikih Thaharah, Jakarta Timur.

Anom Besari A.R., Rachmat A., Zamri R., Ahmad Y., Palil M.D., Prabuwono A.S., 2009. Automatic Ablution Machine using Vision Sensor, 2009 IEEE Procs. of Symposium on Industrial Electronics and Applications (ISIEA 2009), 1: 506-509.

Mamun A.A., Muyibi S.A., Aremu S. and Abdul Razak N.A., 2014. Treatment of Used Ablution Water from IIUM Masjid for Reuse, Advances in Environmental Biology, 8(3): 558-564.

Zaied R.A., 2016. Water Use and Time Analysis in Ablution from Taps, Applied Water Science, 7: 2329–2336.

Merci B., Roekaerts D. and Sadiki A., (Eds.), 2011.Experiments and Numerical Simulations of Turbulent Combustion of Diluted Sprays, Procs. of the 1st International Workshop on Turbulent Spray Combustion, Corsica, France.

Lefebvre A.H., 1989. Atomization and Sprays, Hemisphere, Washington, DC, USA.

Raffel M., Willert C. and Kompenhans J., 1998. Particle Image Velocimetry, Springer, Heidelberg, Germany.

Downloads

Published

2020-10-11

How to Cite

M.Z., H., & M.F., A. Z. (2020). Development of Aerator for Water Saving. Jurnal Mekanikal, (43). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/399

Issue

Section

Mechanical

Similar Articles

<< < 7 8 9 10 11 12 

You may also start an advanced similarity search for this article.