DEVELOPMENT OF 6MO NUMERICAL CHILD DUMMY MODEL FOR CRASHWORTHINESS ASSESSMENT

Authors

  • Mohamad Sulaiman Ibrahim School of Mechatronic Engineering, University Malaysia Perlis, Jalan Kangar Arau 02600 Jejawi Perlis Malaysia
  • Rakhmad Arief Siregar School of Mechatronic Engineering, University Malaysia Perlis, Jalan Kangar Arau 02600 Jejawi Perlis Malaysia
  • Khairul Fuad Mechanical Engineering Department, University Technology Petronas, Bandar Seri Iskandar, 31750, Perak Darul Ridzuan, Malaysia
  • Abdul Hamid Adom School of Mechatronic Engineering, University Malaysia Perlis, Jalan Kangar Arau 02600 Jejawi Perlis Malaysia
  • Shah Fenner Khan School of Mechatronic Engineering, University Malaysia Perlis, Jalan Kangar Arau 02600 Jejawi Perlis Malaysia

Keywords:

Crashworthiness assessment, dummy model, finite element, simulations, head injury criterion.

Abstract

The use of finite element model crash test dummies is advantageous over physical dummies because of lower cost and repeatability. However there are not enough models representing six-month-old child dummy models. This paper presents the development of a six-months-old (6MO) finite element dummy model for crash simulation. The model was developed by using both flexible and rigid body materials. The geometry data were collected by direct measurement in a pediatric center and statistically analyzed to ensure their accuracy. Several simulations of major validation test were performed and compared with other published data. A severe crash simulation was conducted to comprehend the head injury criteria which are used as the basis to observe how the model reacts in the crash in terms of flexibility, joint stiffness, and material behavior. The result of Head Injury Criterion (HIC) for frontal and rear crash simulations was examined and it is found that the child dummy reactions are in good agreement with the threshold values.

References

Mohan. P, Marzougui. D, Roel V. D. Velde, Cing D.(Steve) Kan, 2007, Development of Detailed Finite Element Dummy Model, 6th German LS-DYNA Forum. .

Kate D. Jager, Michiel V. Ratingen, Lesire. P, Pastor. C, Gonçal T. Applus, Jean P. Lepretre, 2005, Assessing New Child Dummies and Criteria for Child Occupant Protection in Frontal Impact, 19th Enhance Safety Vehicle (ESV) Conference.

Ruff C., Eichberger A., 2005, Validation of 3yrs and 6yrs FTSS dummy models for check of OoP suitability, LS-DYNA Anwenderforum, Bamberg.

Richard A. Johnson, Dean W. Wichern, 2001, Applied Multivariate Statistical Analysis (5th Edition).

Livermore Software Technology Corporation, 2007, LS-DYNA keyword user’s manual.

Mohamad S. Ibrahim, Rakhmad A. Siregar, Abdul H. Adom, Shah F. Khan, Zakaria. H, 2009, Development of Numerical Child Dummy Model for Crashworthiness Assessment, 2nd International Conference on Applications and Design in Mechanical Engineering (ICADME), [pg 103].

Cing D. (Steve) Kan, Marzougui. D, Nabih E. Bedewi, 2003, Development of 50th Percentile Hybrid III Dummy, 4th European of LS-DYNA Users Conference.

Wang Y., Rangarajan N., Shams T., Fukuda T., Yamada T., Jenny C., 2005, Design of a Biofidelic Instrumented 3.4KgInfant Dummy, 19th Enhance Safety Vehicle (ESV) Conference.

Xiaoxia. M, Nasser Tamini, Liang. M, Tang. A, Bingyuan. P, 2006, Hybrid III SemiRigid Dummy Models Developed from Rigid Dummy Models in VPG Environment, www.peraglobal.com/10th/paper_car.html.

Naravane. A, Deb. A, 2005, Validation of a Hybrid III Dummy Model and Its Application in Simulation of Vehicle Frontal NCAP Tests, Altair CAE Users Conference.

Gehre. C, Schindler. V, 2005, Development of the Numerical Model of the NewBorn Child Dummy Q0, 19th Enhance Safety Vehicle (ESV) Conference.

Brian G. Mc Henry, 2004, Head Injury Criterion and the ATB, ATB Users' Conference.

Eppinger. E, Sun. E, Kuppa. S, Roger Saul, 2000, Supplement: Development of Improved Injury Criteria for the Assessment of Advanced Automotive Restraint Systems Retrieve on September 15, 2009 from,www.nhtsa.dot.gov/staticfiles/DOT/NHTSA/Rulemaking/Articles/Associated% 20Files/finalrule_all.pdf.

Downloads

Published

2018-04-03

How to Cite

Ibrahim, M. S., Siregar, R. A., Fuad, K., Adom, A. H., & Khan, S. F. (2018). DEVELOPMENT OF 6MO NUMERICAL CHILD DUMMY MODEL FOR CRASHWORTHINESS ASSESSMENT. Jurnal Mekanikal, 32(1). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/91

Issue

Section

Mechanical

Similar Articles

<< < 2 3 4 5 6 7 8 9 10 11 > >> 

You may also start an advanced similarity search for this article.