MODELING AND CONTROL OF ACTIVE SUSPENSION USING PISMC AND SMC

Authors

  • Suaib, N.M. Suaib, N.M. Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor
  • Sam, Y.M Sam, Y.M Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor

Keywords:

Half car suspension system, conventional sliding mode control, proportional-integral sliding mode control, hydraulic actuator, mismatched condition

Abstract

The purpose of this paper is to present a modeling and control of the active suspension system using Conventional Sliding Mode (SMC) and Proportional Integral Sliding Mode Control (PISMC) techniques. The objective of designing the controller for the car suspension system is to reduce the traditional design as a compromise between ride and handling by directly controlling the suspension forces to suit the road and driving conditions. In this paper a new mathematical model is presented which will give a much more complete mathematical representation of hydraulically actuated suspension system for the half car model. In order to achieve the desired ride comfort and road handling and to solve the mismatched condition, a conventional sliding mode control and a proportionalintegral sliding mode control will be utilized to deal with the system uncertainties. Mathematical analysis for reach ability and stability of both controllers will be derived. Finally, a simulation of a half-car hydraulically actuated active suspension system will be carried out using Matlab/Simulink software. Some comparisons and analyses will be made from the simulation results

References

Gulez, K. and Guclu, R., 2008. CBA-neural Network Control of a Non-linear Full Vehicle Model, Simulation Modelling Practice and Theory, (16):1163-1176.

Hrovat, D., 1988. Influence of Unsprung Weight on Vehicle Ride Quality, Journal of Sound and Vibration, 124(3): 497-516.

Tseng, T. and Hrovat, D., 1990. Some Characteristics of Optimal Vehicle Suspensions Based on Quarter-Car Model, Proceedings of the 29th IEEE Conference on Decision and Control, Honolulu, Hawaii: IEEE, 2232-2237.

Esmailzadeh, E. and Taghirad, H.D., 1996. Active Vehicle Suspensions with Optimal State-Feedback Control, Journal of Mechanical Science, 200(4): 1-18.

Yamashita, M., Fujimori, K., Hayakawa, K. and Kimura, H., 1994. Application of H-infinity Control to Active Suspension Systems, Automatica, 30(11): 1717-1792.

Alleyne, A., Neuhaus, P.D. and Hedrick, J.K., 1993. Application of Nonlinear Control Theory to Electronically Controlled Suspensions, Vehicle System Dynamics, 22: 309-320.

Kim, C. and Ro, P.I., 1998. A Sliding Mode Controller for Vehicle Active Suspension Systems with Non-Linearities, Proc. Instn. Mech. Engrs Part D, 212: 79-92.

Park, J.H. and Kim, Y.S., 1998. Decentralized Variable Structure Control for Active Suspensions Based on a Full-Car Model, IEEE Proc. Int. Conf. On Control Applications, Trieste, Italy: IEEE, 383-387.

Sam, Y.M., Osman, J.H.S. and Ghani, M.R.A.A., 2004. Class of ProportionalIntegral Sliding Mode Control with Application to Active Suspension System, System and Control Letters, 51:217-223.

Sam, Y.M. and Osman, J.H.S., 2005. Modeling and Control of the Active Suspension using Proportional-Integral Sliding Mode Approach, Asian Journal of Control, 2(7):91-98.

Huang, C.J. and Lin, J.S., 2004. Nonlinear Backstepping Active Suspension Design Applied to a Half-Car Model, Vehicle System Dynamics, 42(6): 373-393.

Fialho, I. and Balas, G.J., 2002. Road Adaptive Active Suspension Design Using Linear Parameter-Varying Gain-Scheduling, IEEE Transactions on Control Systems Technology, 10(1): 43-54.

Downloads

Published

2018-04-09

How to Cite

Suaib, N.M., S. N., & Sam, Y.M, S. Y. (2018). MODELING AND CONTROL OF ACTIVE SUSPENSION USING PISMC AND SMC. Jurnal Mekanikal, 26(2). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/144

Similar Articles

<< < 7 8 9 10 11 12 13 14 15 16 > >> 

You may also start an advanced similarity search for this article.