Muffler Internal Geometry Parametric Study Related to Sound Transmission Loss and Pressure Drop

Authors

  • Mahadhir Mohammad UTM Center for Low Carbon Transport
  • Mohd Farid Muhamad Said
  • Srithar Rajoo

Keywords:

muffler, sound transmission loss, pressure drop, exhaust, 1D simulation

Abstract

A muffler is a device used to attenuate noise generated in an exhaust system. The current research objective is to study the changes in internal muffler geometry effect towards the sound transmission loss (STL) and pressure drop (PD). A complex muffler of 1.6L natural aspirated engine was chosen for this research work. The research tools used were Ricardo Wave Build and Wave Build 3D. The four focus parameters: main muffler volume, pipe diameter, porosity of the baffle and porosity of the inlet pipe. The effect of internal geometry was analysed from the parametric studies. When the muffler volume increased by 10%, the average STL increased by 1% and the PD reduced by 2% respectively. When the diameter of the pipe increased with fixed muffler volume, the average STL dropped by 9% and PD dropped by 30%. The perforated on baffle showed less effect on average STL which can increase by a maximum of 1 dB and PD showed an average reduction by 0.8% as the perforated on baffle increased. For the case of perforated on pipe, as perforated on pipe increase, STL improved less than 1dB and PD reduced by 7%. From the result of all parametric studies, the STL was mostly affected by the muffler main volume while PD was affected by the pipe diameter.

Downloads

Published

2021-12-27

How to Cite

Mohammad, M., Muhamad Said, M. F., & Rajoo, S. (2021). Muffler Internal Geometry Parametric Study Related to Sound Transmission Loss and Pressure Drop. Jurnal Mekanikal, 44(02), 12–25. Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/431

Issue

Section

Mechanical

Similar Articles

<< < 2 3 4 5 6 7 8 9 10 11 > >> 

You may also start an advanced similarity search for this article.