DRAG REDUCTION BY BIOPOLYMER OF MONEPTERUS ALBUS SLIME ON SHIP MODEL WALL

Authors

  • Yanuar Yanuar Department of Mechanical Engineering Faculty of Engineering, University of Indonesia Jakarta 16424, Indonesia
  • M A Talahatu M A Talahatu Department of Mechanical Engineering Faculty of Engineering, University of Indonesia Jakarta 16424, Indonesia
  • Sunaryo Sunaryo Department of Mechanical Engineering Faculty of Engineering, University of Indonesia Jakarta 16424, Indonesia
  • Warjito Warjito Department of Mechanical Engineering Faculty of Engineering, University of Indonesia Jakarta 16424, Indonesia

Keywords:

Monepterus albus slime, drag reduction, ship model wall.

Abstract

The surface viscous liquid is one of fish’s resistance reduction elements. The fish surface is covered with viscous liquid, which is considered to reduce the resistance. As compared with a solvent, a certain polymer solution of several ppm to several hundred ppm offers substantially reduced turbulent frictional resistance. The relationship between the Tom’s effect and reduction of viscosity resistance is described. The purpose of this research is to study the drag reduction in resistance of ship model wall by monepterus albus slime. The ship model with L = 2.3 m, B = 0.4 and T = 0.15 m pulled by electric motor which speed can be varied. The ship model resistance is measured by load cell dynamometer. The results show the drag reduction is about 8%.

References

Fukuda, K., Tokunaga, J. Nobunaga, T. et al., 1999. “Frictional Drag Reduction with Air Lubricant over Super-Water Repellent Surface. Journal of Marine Science and Technology. J Mar Sci Technol (2000) 5:123–130

Toms. B. A. -Somle observations on the flow of linear polymer solutions through straight tubes at large Reynolds numbers," International Congress onl Rhecology,I Holland. 1948. Amsterdlam. North I lolh.aid, 1949, Part 11, pp. 135-141.

Hoyt. J . W.. and Fabula. A. G. "The effect of additives on fluid friction."Naval Ordnance rest Station. China Lake, Calif., 1964. (Navweps Report 8636.)

Vogel, M,M., and Patterson.A.M., “An Experimental Investigation of The Effects of Additives Injected into The Boundary Layer of An Underwater Body.â€Proc. 5th Symposium on Naval Hydrodynamics. Bergen, ONR – ACR – 112, 1964. P. 975.

Canham, H.J.S., Cathchpole, J.P., and Long, R.F., “Boundary Layer Additives to Reduces Ship Resistance.â€

Hoyt JW, Sellin RHJ (1993) Scale effects in polymer solution pipe flow. Exp. Fluids 15:70–74

Ripken. J, 1.,and Pilch. M. "Non newtonian pipe friction studies with various polymer water solutions." St. Anthony Falls Hydraulic Laboratory, University of Minnesota. Minneapolis. Minn-, 1964. (Project Report No. 7 1.)

Rosen and E. Conford Neri, “Fluid Friction of The Slime of Aquatic Animals.â€Technical Publication of Naval Undersea Research and Development Centre Department of The Navy. November 1970.

Downloads

Published

2018-04-03

How to Cite

Yanuar, Y., M A Talahatu, M. A. T., Sunaryo, S., & Warjito, W. (2018). DRAG REDUCTION BY BIOPOLYMER OF MONEPTERUS ALBUS SLIME ON SHIP MODEL WALL. Jurnal Mekanikal, 32(1). Retrieved from https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/97

Issue

Section

Mechanical

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.